Garden Pond 300 Gallon & Liner – This above ground 300 Gallon Pool, makes a great garden water feature! Quality of life is to be near water. The Intalogs design is very easy to assemble, with slot together parts and no digging or foundations required. This garden pool makes a great water feature and is so quick and easy to assemble, you’ll wish you bought it sooner! . •Wooden pool with liner (approx 59cm deep, 1′ 11”) •Overall Measure: 2.29m (7′ 6”) x 59cm (1′ 11”Depth. • The internal measurement is 72” and the external is 74.5” these measurements are from front to back (straight sides not point to point)
We hope the above video is of some use to you, although of the smaller model pond, it is the same generally overall.
A wonderful and clean looking wooden garden pond with liner. It holds 1,364 litres of water (300 gallons), approx 59cm deep, (1′ 11”) and overall Measures 2.29m (7′ 6”). The internal measurement is approx 1.8m and the external is 1.9m, the measurements are from front to back (Using the straight sides not point to point). It has an Intalogs design which looks natural and is very easy to assemble. Each of the wooden slats basically slot together, add sand or as some do, an old carpet cut off as protection for the liner and then place it over the structure and tuck the edges out of sight. The Garden Pond 300 Gallon & Liner doesn’t require you to dig holes but you will need to make sure it is placed on solid ground which is level. Some ideas for that would be to add paving slabs underneath and then install on the top of them, but again it is not necessary if the ground is solid. To be honest, it is so quick and easy to assemble, you may wonder why you never installed a garden pond before! It will provide endless hours of fascination, especially after fish are added and other creatures begin appearing in and around it. We really like this pond, mainly because it looks so natural and is simple to install, so we give it 5 stars.